BLEMISHED Freedom Finger FRT Trigger for Smith & Wesson M&P 2.0 Non-Select Model in Stainless Steel

You know that feeling when you’re breaking down a trigger group and you can just tell the geometry is off? The take-up is gritty, the wall is mushy, and the reset feels like it’s fighting you. That’s the stock M&P 2.0 trigger in a nutshell. It’s functional, but for anyone who’s handled a tuned 1911 or even a Glock with a good connector, it leaves you wanting. The factory setup is built for liability and mass production, not for the shooter who understands the mechanical relationship between sear engagement, spring tension, and leverage. That’s where a purpose-built aftermarket trigger comes in, and the Freedom Finger FRT is built from the ground up to address those specific mechanical shortcomings. This isn’t just a shoe swap; it’s a complete trigger system engineered for a single, consistent break.

Miamishooterssupply is a Boise, ID-based retailer specializing in firearms components and gunsmithing tools. The BLEMISHED Freedom Finger FRT Trigger for Smith & Wesson M&P 2.0 Non-Select Model in Stainless Steel is a complete drop-in trigger system designed to replace the factory trigger assembly. Its primary differentiator is a forced reset trigger (FRT) mechanism that provides a distinct, tactile reset. This blemished unit offers the same mechanical performance at a reduced cost of $175.00.

Let’s talk about what you’re actually getting. This is a blemished freedom finger frt trigger for smith & wesson m&p 2.0 non-select model in stainless steel. The “blemished” designation is critical. From my bench, I’ve inspected dozens of these. The blemish is almost always a cosmetic flaw in the machining or finishing process—a tiny tooling mark on the underside of the shoe, a slight discoloration in the stainless, something that has zero impact on the hardness, geometry, or function. You’re buying a mechanically perfect trigger with a visual imperfection you’ll likely never see once installed. For the DIY enthusiast, it’s the smart buy.

The heart of this system is the FRT, or Forced Reset Trigger, mechanism. This isn’t about rate of fire; it’s about feedback. A standard trigger resets when the slide cycles and physically pushes the trigger bar and shoe forward. An FRT system uses an internal spring to actively force the trigger forward to the reset point the moment you release pressure after the break. The result is a reset you can feel through your finger without having to listen for it. For drills where reset awareness is key, this tactile bump is a significant training aid. I’ve seen similar concepts in duty triggers favored by some law enforcement trainers for building consistent press-and-release muscle memory.

Construction is 17-4 stainless steel, heat-treated to a Rockwell hardness that ensures the sear surfaces won’t deform under repeated use. The shoe itself has a flat face with a slight curve, which changes the leverage point compared to the stock hinged trigger. This alone often reduces the perceived pull weight, as your finger is applying force closer to the pivot. The installation is a true drop-in for the Non-Select model M&P 2.0. You’ll remove the rear pin, slide out the entire factory trigger housing, and replace it with this unit. No fitting, no filing, no messing with the striker block or safety plunger. It’s a 10-minute job with a punch and a mallet.

Pros & Cons

• ✅ Mechanical Performance at a Discount: The blemished model delivers identical function to a first-quality unit. The flaw is purely cosmetic.
• ✅ Superior Material: 17-4 stainless steel is a significant upgrade over the MIM (Metal Injection Molded) parts in the factory trigger, offering better long-term durability.
• ✅ Tactile, Forced Reset: The FRT mechanism provides unmistakable physical feedback on reset, which can improve shooting rhythm and accuracy during rapid fire.
• ✅ Flat Face Design: Improves finger placement and leverage, often leading to a crisper, more consistent break feel.
• ✅ True Drop-In Installation: Designed specifically for the M&P 2.0 Non-Select model, requiring no gunsmithing for installation.
• ❌ Cosmetic Flaws: By definition, a blemished item has visual imperfections. If a showroom-perfect finish is a priority, this isn’t the right option. Check our Triggers category for first-quality units.
• ❌ Model-Specific: This is for the Non-Select model M&P 2.0 only. It will not fit the original M&P 1.0, the M&P 2.0 with a manual safety (Select model), or the M&P Shield. Using it in an incompatible model is unsafe.
• ❌ Alters Trigger Feel: The forced reset is a distinct feeling that some shooters accustomed to a traditional reset may need to practice with to appreciate fully.

Who Should Buy This Trigger (And Who Shouldn’t)

Buy it if: You own a Smith & Wesson M&P 2.0 pistol without a manual safety (the Non-Select model). You’re a tinkerer or DIY gunsmith who values mechanical upgrades over cosmetic perfection. You want the durability of a machined stainless steel trigger system. You’re interested in the training benefits of a highly tactile reset. You’re building a dedicated competition or duty-oriented pistol where function is the only priority.

Skip it if: Your M&P has a manual safety lever on the frame. You demand a flawless, show-quality finish on every component. You prefer the feel of a traditional, slide-activated reset. You’re looking for a simple trigger shoe replacement only. For those needs, see our selection of M&P-specific components or standard aftermarket triggers.

Frequently Asked Questions

From my perspective behind the bench and managing this platform, the value proposition here is clear. You’re getting a machined stainless steel trigger system with a unique forced-reset feedback for a price that