BLEMISHED Freedom Finger FRT Trigger for Smith & Wesson M&P 2.0 – Non-Select Stainless Steel

You know that feeling when you’re breaking down a trigger group and you can see exactly where the geometry is holding you back? That’s where I started with the M&P 2.0 platform. The factory trigger is serviceable, but for the tinkerer, the DIY enthusiast who wants to feel the connection between their finger and the sear, there’s room for improvement. This isn’t about turning a duty pistol into a race gun; it’s about refining the interface. The BLEMISHED Freedom Finger FRT Trigger for the Smith & Wesson M&P 2.0 in Non-Select Stainless Steel represents a specific kind of value proposition. It’s a performance-oriented component where the only compromise is cosmetic, offering the same mechanical integrity and functional upgrade as a first-quality unit, but at a price point that makes sense for the hands-on shooter.

Miamishooterssupply is a Boise, ID-based retailer specializing in firearms components and accessories for the DIY builder. The BLEMISHED Freedom Finger FRT Trigger for Smith & Wesson M&P 2.0 is a performance-focused, flat-faced trigger shoe upgrade manufactured from stainless steel. Its primary differentiator is a functional, non-select design that provides a consistent, predictable pull profile, offered here with cosmetic blemishes at a significant discount. This blemished unit is in stock for $175.00 with same-day shipping from our Idaho warehouse.

What This Blemished Freedom Finger FRT Trigger Delivers

Let’s cut through the marketing. A “blemished” part in the firearms world, especially from reputable manufacturers, typically means a minor cosmetic flaw—a machining mark, a slight discoloration in the finish, or a non-structural scratch that occurred during handling or packaging. It does not mean the part is out of spec, functionally impaired, or unsafe. From my perspective as someone who’s installed hundreds of triggers, this is where the real value is for a builder. You’re getting the exact same hardened stainless steel, the same precise geometry, and the same installation process. The only thing you’re not paying for is the flawless appearance. For a part that lives inside a frame and is touched by one finger, that’s a trade-off many experienced shooters are willing to make.

The “Non-Select” designation is crucial to understand. Unlike some adjustable competition triggers, this is a fixed, single-stage design. What you gain is simplicity and robustness. There are no set screws to vibrate loose, no tiny springs to lose during installation. It’s a solid piece of machined metal designed to provide a clean, consistent break and a positive reset. The flat-faced “Freedom Finger” shoe itself is a major ergonomic upgrade over the factory curved trigger. It allows for a more consistent finger placement, which can directly translate to better shot-to-shot control, especially during rapid fire or competitive strings. The stainless steel construction isn’t just for looks; it’s about durability and a smooth, consistent feel against the frame and trigger bar.

Key Features & Build Quality

The heart of this upgrade is the material and machining. We’re talking about precision-machined stainless steel, not MIM (Metal Injection Molded) or cast parts. You can feel the difference in hand. The weight is solid, the edges (aside from any stated blemish) are cleanly broken, and the finish, while potentially imperfect in spots, is designed for smooth operation. The hardness rating on these components is typically in the high 40s to low 50s on the Rockwell C scale, which is more than sufficient for the stresses a trigger shoe encounters. It’s built to last the life of the firearm.

Installation is straightforward for anyone familiar with detail-stripping their M&P 2.0. It’s a direct replacement for the factory trigger shoe. You’ll need a punch set and a workspace where you can manage the small springs and pins. The process involves driving out the trigger pin, swapping the shoe, and reassembling. I always recommend consulting a detailed video guide or the firearm’s manual if it’s your first time. The benefit of this non-select design is that once it’s in and the pin is secured, it’s set. There’s no fiddling with pre-travel or over-travel screws to chase a perfect setting that might shift over time.

Pros and Cons: An Honest Assessment

Pros:

• ✅ Substantial Cost Savings: You receive the full mechanical and performance benefit of a premium trigger shoe at a blemished-item price.
• ✅ Premium Material: Machined stainless steel offers superior durability and feel compared to factory or budget aftermarket options.
• ✅ Ergonomic Flat Face: The Freedom Finger design promotes consistent finger placement for improved control.
• ✅ Non-Select Reliability: A fixed, simple design means no adjustments to fail or come loose under recoil—set it and forget it.
• ✅ Direct Compatibility: Engineered specifically for the M&P 2.0 series, ensuring proper fit and function with the factory trigger bar and safety mechanisms.

Cons:

• ❌ Cosmetic Flaws: By definition, this unit will have visible blemishes. If showroom-perfect appearance is critical, this isn’t the right choice. Consider a first-quality trigger from our selection.
• ❌ No Adjustability: The non-select design means you cannot fine-tune pre-travel or over-travel. Shooters wanting that level of customization should look at fully adjustable competition triggers.
• ❌ Installation Required: This is not a drop-in cassette. It requires partial disassembly of your firearm. If you’re not comfortable with that, factor in the cost of a gunsmith’s installation.

Who Should (and Shouldn’t) Buy This Trigger

Buy it if: You’re an M&P 2.0 owner who prioritizes function over flawless cosmetics. You understand the value proposition of blemished parts. You want the durability of machined stainless steel and the ergonomic benefit of a flat-faced trigger without paying a premium for looks. You’re comfortable with basic gunsmithing tasks or willing to learn. You prefer a simple, robust design without adjustable screws.

Skip it if: You demand a perfect, unmarked finish on every component. You are looking for a fully adjustable trigger with customizable pre-travel and reset. You want a complete drop-in trigger system that replaces the entire bar and sear. You are unwilling or unable to perform the installation yourself. For those needs, browse our full trigger systems category for other solutions.

Technical Specifications

How It Stacks Up: A Real-World Comparison

Feature	BLEMISHED Freedom Finger FRT (This Product)	Budget Import Trigger (~$65)	Premium Brand Adjustable (~$250+)
Material	Machined Stainless Steel	Often Aluminum or Soft Steel	Machined Stainless or Tool Steel
Quality	High (with cosmetic flaws)	Variable, often lower fit/finish	High, first-quality finish
Compatibility	Specific to M&P 2.0	May require fitting/filing	Specific to M&P 2.0
Shipping	Same-day from USA (ID)	Slow boat from overseas	Varies, often USA
Lifespan/Durability	Very High	Questionable	Very High
Price	$175.00	$60 – $80	$250 – $300+

The comparison shows this blemished unit occupies a smart middle ground. You avoid the potential fitment issues and material concerns of the cheapest options, while accessing the core performance material of the premium tier without its cost for adjustability and flawless cosmetics.

Frequently Asked Questions

Ready to Ship from Boise

If you’re the type of shooter who values performance where it counts and sees a cosmetic blemish as a badge of a smart purchase, this trigger represents a solid upgrade path for your M&P 2.0. It brings the material quality and ergonomic design of a premium component within reach, letting you invest in the feel of the shot rather than a perfect polish.

Browse more: Firearms | New Arrivals | New Releases | Full Shop